Hobart Filler Metals

Home > Products > Flux-Cored Wires (Gas)

Flux-Cored Wires (Gas)

Produce flat weld bead profiles with excellent penetration characteristics. Available for mild steel and low-alloy steel applications. Provide good impact strength for improved toughness at low temperatures.

FabCO® 711M

The stiff arc action of this wire enhances the deep penetration for out of position welding. Designed for use welding carbon steels, or higher strength steels where the properties of an E71T‑1 are deemed adequate. ...

TM-771

This tubular wire combines excellent operator appeal with mechanical properties superior to most conventional E71T‑1 wires. A soft quiet arc with virtually no spatter produces a weld deposit with diffusible hydrogen levels typically less than 5ml/100 g req ...

FabCO® Element™ 71T1C

Engineered as a low Manganese (Mn) E71T‑1C product to provide conformance to OSHA requirements and NIOSH and ACGIH recommendations for Manganese. FabCO Element 71T1C provides reductions of Mn in the weld fume of 60‑80% over a standard E71T‑1C product with ...

FabCO® Triple 7

Intended for single and multiple pass applications in all positions. Designed for carbon and higher strength steels. ...

FabCO® Excel-Arc™ 71

All position wire for both CO2 and mixed gas. For mild and low alloy steel applications. ...

FabCO® Triple 8

An all position tubular wire with higher impact values than most other E71T‑1 wires. Single or multiple pass welds, easy slag removal and low spatter levels, allows this wire to be used in deep groove applications as well as standard joint configurations. ...

FabCO® 712C

Engineered to produce excellent mechanical properties at lower temperatures in both the as welded and post weld heat treat conditions. Provides low hydrogen levels in all welding positions. ...

FabCO® XL-550

Formulated to allow excellent impact values at lower temperatures. All position wire with low hydrogen levels. ...

FabCO® Element™ 71T1M

Formulated as a low Manganese (Mn) E71T‑1M product to meet conformance to OSHA requirements and NIOSH and ACGIH recommendations for Manganese. This product offers reductions of Mn in the weld fume of 60‑80% over a standard E71T‑1M product with low diffusib ...