FabCO® 101
A5.29: E101T1-GM
This wire minimizes the crack sensitivity in quench and tempered low alloy steels such as ASTM A514. Excellent impact properties at low temperatures.
FabCO® 110
A5.29: E111T1-K3 MJ H8
This wire minimizes the crack sensitivity in quench and tempered low alloy steels such as ASTM A514.
FabCO® 111-V
A5.29: E111T1-K3C
High strength all-postion gas-shieled flux core wire used to join quench and tempered steels like ASTM A514
FabCO® 750M
AWS A5.29: E111T1-K3M J H4
All position gas shielding flux-cored wire, FabCO® 750M is designed for welding of offshore jack up rigs and high strength steels such as A514, A710, EQ56, and similar HSLA and Q&T steels
FabCO® 803
A5.29: E81T1-Ni2CJ H4/-Ni2MJ H4
FabCO 803 is especially suited for those fine grained steels where low temperature CVN toughness is needed. Ideal for welding 2% Nickel steels. Provides a fast-freezing slag, low spatter, excellent ar…
FabCO® 811A1
A5.29: E81T1-A1C H8
All position flux-cored welding electrode for welding the 0.50% Molybdenum steel and other low alloy steels.
FabCO® 811N1
A5.29: E81T1-Ni1CJ H4/-Ni1MJ H4
All position flux-cored wire used in applications where low temperature notch toughness is required. Can be used on weathering steels when color match is not required.
FabCO® 812-Ni1M
A5.29: E81T1-Ni1 MJ H4
Designed for excellent mechanical toughness at lower temperatures in both the as welded and post weld heat treat conditions. All position wire with low hydrogen levels
FabCO® 81K2-C
A5.29: E81T1-K2CJ H8
All position wire designed for 100% CO2 gas. For mild and low alloy steel applications.
FabCO® 881K2
A5.29: E81T1-K2MJ H8
Designed for use in the off shore market due to its excellent impact resistance at low temperatures.
FabCO® 911B3
A5.29: E91T1-B3C H4/-B3M H4
Suitable for use on materials having a similar composition, such as ASTM A387 or P21/P22 Pipe. Suitable for extended service at elevated temperature. Provides good puddle control and bead contour wh…
FabCO® 91K2-C
A5.29: E91T1-K2C J H4
All position wire formulated to allow for excellent mechanical toughness properties at lower temperatures in the as welded conditions.
FabCO® 91K2-M
A5.29: E91T1-K2M J H4
Designed for excellent mechanical toughness at lower temperatures in the as welded conditions, while providing high weldability in all positions.
FabCO® Element™ 81K2C
A5.29: E81T1-GC H8
Designed as a low Manganese (Mn) replacement for E81T1-K2C products. Meets all requirements of E81T1-K2C classification except for the minimum Mn requirement. This product offers reductions of Mn in …
FabCO® XTREME® 120
A5.29: E121T5-GC H4
All position gas shielding flux-cored wire designed for welding of offshore jack up rigs and high strength steels such as A514, A710, EQ56, and similar HSLA and Q&T steels
FabCO® XTREME® 85
A5.29: E81T5-Ni2 C H4
All position gas shielding flux-cored wire, FabCO® XTREME® 85 was designed for welding of X80 Grade transmission pipeline and offshore platforms and structural applications.
FabCO® XTREME® 95
A5.29: E91T5-GC H4
All position gas shielding flux-cored wire designed for welding of X80 Grade transmission pipeline and offshore platforms and structural applications.