Welding Pipe

Products

Aluminum – MIG/TIG

As a premium filler metal solution, Hobart Aluminum is supported and manufactured by a team with decades of expertise in aluminum filler metals. It’s produced from a state-of-the-art facility, entirely built around aluminum wire production.

Flux-Cored Wires (Gas)

Produce flat weld bead profiles with excellent penetration characteristics. Available for mild steel and low-alloy steel applications. Provide good impact strength for improved toughness at low temperatures.

Flux-Cored Wires (Self)

Produce flat weld bead profiles with excellent penetration characteristics. Available for mild steel and low-alloy steel applications. Provide good impact strength for improved toughness at low temperatures.

MEGAFIL: Seamless Technology

Provide excellent slag removal to minimize interpass and post-weld cleaning. Wire selections that offer good impact strength at low temperatures. Options for general fabrication, structural, offshore, pipe welding and other applications.

Hardfacing

Available for hard surfacing, low-alloy and carbon steel applications. Compatible submerged arc fluxes also available. Options available for applications requiring low temperature toughness and high strengths.

Metal-Cored Wires (Gas)

Improve deposition rates and productivity compared to solid wires. Able to weld through rust and mill scale. Generate little to no spatter to minimize pre- and post-weld activities.

Solid Wires

Provide consistent feeding to increase productivity. Options for higher deoxidizers to weld through mild contaminants. Usable for robotic, automatic and semi-automatic applications.

Stainless

Available in stick electrodes, tubular wires, solid spooled wires, 36-inch cut lengths, and submerged arc wires. Provide excellent resistance to moisture and corrosion. Generate low spatter levels and a self-detaching slag

Stick Electrodes

Provide good arc stability and reliable re-strikes. Easy slag release and low spatter reduce cleanup. Mild steel, Low alloy, stainless steel and hard surfacing versions available.

Submerged Arc

Hobart Filler Metals provides an extensive offering of solid wires, cored wires, strips, and fluxes for joining, cladding, and hardfacing a wide range of base materials: carbon steels, low-alloy steels, stainless steels, and nickel-based alloys. No matter the application or demands, Hobart has your submerged arc solution.

Approvals

308/308L MIG

308/308L MIG

A5.9: ER308, ER308L

Used to weld Types 201, 302, 304 and 308 stainless steels. Can also be used for joining some dissimilar 300 series steels. Has a low carbon content to help prevent intergranular corrosion.

View Details

308/308L Sterling® AP

308/308L Sterling® AP

A5.4: E308-16 & E308L-16

Primarily designed for welding type 308L base metal with low or medium carbon content. Contains low carbon to avert carbide precipitation during welding as well as weld service. Excellent for weldin…

View Details

308/308L TIG

308/308L TIG

A5.9: ER308, ER308L

Used to weld Types 201, 302, 304 and 308 stainless steels. Can also be used for joining some dissimilar 300 series steels. Has a low carbon content to help prevent intergranular corrosion.

View Details

308L HiSil

308L HiSil

A5.9: ER308LSi

A 308L chemistry which has been modified with a higher silicon level to increase weld puddle fluidity, ensuring better tie-ins and potentially higher welding speeds.

View Details

309/309L MIG

309/309L MIG

A5.9: ER309, ER309L

Used for joining similar 309L alloys or for joining 300-series stainless steels to carbon or low alloy steels.

View Details

309/309L Sterling® AP

309/309L Sterling® AP

A5.4: E309-16 & E309L-16

A lower carbon version of the 309(H) Sterling AP. Low carbon content makes it excellent for applications where reduced susceptibility to sensitization during high temperature service is necessary. O…

View Details

309/309L TIG

309/309L TIG

A5.9: ER309, ER309L

Used for joining similar 309L alloys or for joining 300-series stainless steels to carbon or low alloy steels.

View Details

309L HiSil

309L HiSil

A5.9: ER309LSi

A modified 309L deposit. Higher silicon levels overcome the typical sluggish nature of 300-series stainless steel welding puddles.

View Details

310 Sterling® AP

310 Sterling® AP

A5.4: E310-16

Used to join 310 stainless as well as for the welding of steels with 20%-27% Chromium and 18%-22% Nickel. Used as a transition layer for high restrained joints of high carbon steels.

View Details

312 Sterling® AP

312 Sterling® AP

A5.4: E312-16

Designed for welding dissimilar joints of Type 312 metals. Can be used on hardenable steels, steel armor and generally hard-to-weld steels, offering outstanding performance with a directional arc and…

View Details

316/316L MIG

316/316L MIG

A5.9: ER316, ER316L

Formulated with molybdenum for increased pitting corrosion resistance and low carbon for better intergranular corrosion.

View Details

316/316L Sterling® AP

316/316L Sterling® AP

A5.4: E316-16 & E316L-16

Possesses properties similar to 316/316H Sterling AP except with a much lower carbon content which reduces susceptibility to sensitization during welding. The welds show high resistance to corrosion …

View Details

316/316L TIG

316/316L TIG

A5.9: ER316, ER316L

Formulated with molybdenum for increased pitting corrosion resistance and low carbon for better intergranular corrosion.

View Details

316L HiSil

316L HiSil

A5.9: ER316LSi

Provides a 316L weld deposit but has better wetting action in the puddle due to higher levels of silicon.

View Details

Deckmaster™ 1139

Deckmaster™ 1139

E6022 (E4322*)

Designed for welding roof decking to support beams and other similar applications where burn-through spot welds with full penetration are required. Also designed to weld through galvanized or painted…

View Details

FabCO® 101

FabCO® 101

A5.29: E101T1-GM

This wire minimizes the crack sensitivity in quench and tempered low alloy steels such as ASTM A514. Excellent impact properties at low temperatures.

View Details

FabCO® 101K3

FabCO® 101K3

A5.29: E100T1-K3C

Offers excellent properties on many higher strength steels.

View Details

FabCO® 105D2

FabCO® 105D2

A5.29: E100T5-D2C

This product can be used for the repair of manganese-moly castings, or components that must undergo post weld heat treatment and maintain a tensile strength in the neighborhood of 100,000 psi. The bas…

View Details